Home | Gadgeteer

Notification

Icon
Error
Newbie question about sensors
Options
Previous Topic Next Topic
H K
#1 Posted : Monday, March 26, 2012 9:45:19 AM(UTC)
Rank: Tinkerer

Joined: 3/26/2012(UTC)
Posts: 2

Hi everyone,


I'm a developer who's started dabbling in embedded electronics.  While looking for a main board/controller for the project I'm working on, it appeared that either the aduino or netduino was my only real choice.  Being a C# developer, I went with the netduino.  While looking up a reference on NETMF, I discovered this Gadgeteer concept.


I'm really intriqued by the Hydra and Spider boards.  The additional memory + touch screen capability makes it very attractive when compared to the netduino I have and I would really love to switch.  My question is:


How would I go about hooking up standard sensors to one of these boards?  For instance, the project I'm working on has several of the flat force sensors and a flow control sensor.  On the netduino/Audino it's pretty straight forward, you just connect the sensor to the appropriate pin on the board. Would I have to go through the process of creating a module to get these sensors connected, or is there some sort of add on board that I would connect them too? 


If anybody has a quick answer or a link to an article that talks about this sort of thing, I'd appreciate it.  I browsed through some of the getting started articles, and the other topics on this board, but didn't really see anything that addressed this.


Thanks,


Kevin
Back to top
James Carter
#2 Posted : Monday, March 26, 2012 10:09:36 AM(UTC)
James Carter

Rank: Gadgeteer

Joined: 7/22/2011(UTC)
Posts: 21

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
Hi Kevin,

If your wanting 'pin' access like you would get on a Netduino, such as accessing the ADC ports for your force sensors. You would buy an 'Extender' module as they are being called. This will expose all pins of a socket onto a 0.1" pitch board which you can plug into a breadboard.
You can then attach your sensors to this. You just need to refer to the socket pinning diagram to determine which pin to connect too.

Regards,
James
Back to top
H K
#3 Posted : Monday, March 26, 2012 10:50:14 AM(UTC)
Rank: Tinkerer

Joined: 3/26/2012(UTC)
Posts: 2

Hi James,


That's exactly what I need.  I will look into the extender modules.
Back to top
MikeDodaro
#4 Posted : Monday, April 16, 2012 7:42:19 PM(UTC)
Rank: Gadgeteer

Joined: 11/22/2011(UTC)
Posts: 10
Here's an example that implements a sensor using the Gadgeteer Extender Module: http://wp.me/p1TEdE-4O
Back to top
Rss Feed  Atom Feed
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.077 seconds.
© 2011 Microsoft Corporation