| Project | Vendor | Category | Rating |
AMI Room Touch Controller
Based on the AMI platform but fitting into a standard wall socket the AMI RTC gives you a stable nice hardware to fit your home. Can be extended by a EIB/KNX bus, 868 MHz wireless devices, the AMI Access module with a RFID reader and a capacitive pinpad.
| AUG Elektronik GmbH | Hardware (Kits and Ports) |
|
AUG AMI DevKit
AUG AMI DevKit is based on the ATMEL AT91SAM9261 (ARM 9 Core) and the .NET Micro Framework 3.0 and 4.0. The board is equipped with a 3.4" OLED Display 480x272 (amazing viewing angle and contrast at very low power consuption), a 10/100 MBit Ethernet Auto-MDI and a lot more nice features on it like touch-screen with gesture support. The DevKit comes with all cabling and stuff you need to get started instantly.
| AUG Elektronik GmbH | Hardware (Kits and Ports) |
|
ChipworkX
ChipworkX Development System is the official kit from GHI Electronics for ChipworkX Module. This kit exposes various peripherals and interfaces that make it an ideal fast start for any project with .NET Micro Framework with high performance and ultimate capabilities. Furthermore, most of ChipworkX module signals such as GPIO, SPI and UART are exposed on 0.1" header pins for easier prototyping.
| GHI Electronics, LLC | Hardware (Kits and Ports) |
|
EDK
The Embedded Development Kit (EDK) for the Microsoft® .NET Micro Framework provides you with the core hardware and train¬ing needed to get started using .NET Micro Framework. Develop¬ing an embedded device from the ground up has always been a challenging task. Board bring-up is the critical path for any pro¬ject. The EDK has been designed to help eliminate this critical path so you can concentrate on your application.
The EDK features EMAC’s iPac-9302 Single Board Computer (SBC) with the .NET Micro Framework already ported. The iPac- 9302 features a Cirrus Logic EP9302 ARM9 processor with a variety of I/O ports to meet the needs of any application such as robotics, industrial controls, sensor applications, etc. With the EDK, .NET applications can be written using Microsoft® Visual Studio to control basic I/O functions such as GPIO, A/D converters, pulse-width modulation, serial, and much more.
The instruction manual covers the basics of the .NET Micro Framework classes. Several examples build on one another to build a more complex system, thus providing a foundation to develop your own projects.
The EDK is ideal for engineering students getting familiar with writing code for an embedded system, hobbyists, and Engineers looking to develop small footprint devices. With the .NET Micro Framework already ported to the iPac-9302, you only have to focus on writing the application, thus saving time to market.
| SJJ Embedded Micro Solutions | Hardware (Kits and Ports) |
|
EDKPlus
The Embedded Development Kit Plus (EDKPlus) for the Microsoft® .NET Micro Framework provides you with the core hardware and train¬ing needed to get started using .NET Micro Framework. Develop¬ing an embedded device from the ground up has always been a challenging task. Board bring-up is the critical path for any pro¬ject. The EDK has been designed to help eliminate this critical path so you can concentrate on your application.
The EDK features EMAC’s iPac-9302 Single Board Computer (SBC) with the .NET Micro Framework already ported. The iPac- 9302 features a Cirrus Logic EP9302 ARM9 processor with a variety of I/O ports to meet the needs of any application such as robotics, industrial controls, sensor applications, etc. With the EDK, .NET applications can be written using Microsoft® Visual Studio to control basic I/O functions such as GPIO, A/D converters, pulse-width modulation, serial, and much more.
The instruction manual covers the basics of the .NET Micro Framework classes. Several examples build on one another to build a more complex system, thus providing a foundation to develop your own projects.
The EDK is ideal for engineering students getting familiar with writing code for an embedded system, hobbyists, and Engineers looking to develop small footprint devices. With the .NET Micro Framework already ported to the iPac-9302, you only have to focus on writing the application, thus saving time to market.
| SJJ Embedded Micro Solutions | Hardware (Kits and Ports) |
|
FEZ Domino/Mini
FEZ Domino and FEZ Mini are very small (open source) boards targeted for beginners. They are based on USBizi chipset and so they have all USBizi features. Those little boards offer a lot of peripherals not available with any hobby-targeted board. Even tough it is targeted for beginner, it is a low-cost starting point for any professional wanting to test out NETMF.
FEZ stands for "Freakin' Easy!"
Features available in FEZ but not available in Arduino, BASIC STAMP and others:
1. Based on Microsoft .NET Micro Framework.
2. Support runtime debugging (breakpoint, variable inspection, stepping...etc.)
3. Uses free VS2008 C# express edition for development.
4. High-end features like FAT, USB device and USB host.
5. Hardware independent. Easily upgrade to more fancy hardware like ChipworkX.
6. Open source hardware design files.
7. Already available shields and holder boards.
8. Based on USBizi chip. Use the chipset to create new designs.
FEZ Mini comes alone or bundled in different kits forms, like the starter kit and the robot kit.
There are tens of sensors that are ready to plug directly into the kits. For LEDs and buttons to reflection and temperature sensors. Many projects can now be completed with NETMF without the need for any soldering. www.TinyCLR.com
| GHI Electronics, LLC | Hardware (Kits and Ports) |
|
Gemini development kit
The Gemini Embedded Development Kit for the Microsoft® .NET Micro Framework provides you with the core hardware and training needed to get started using .NET Micro Framework.
The Geminiis based on the ARM 920T Core and the .NET Micro Framework 4.0. The board is equipped with a 5.6" OLED Display 640x480 (amazing viewing angle and contrast at very low power consuption), a 10/100 MBit Ethernet Auto-MDI and a lot more nice features on it like touch-screen with gesture support.
The Gemini is ideal for engineering students getting familiar with writing code for an embedded system, hobbyists, and Engineers looking to develop small footprint devices.
Gemini Development Kit:
- 200MHz ARM920T Core
- 32M Nor Flash
- 64M SDRAM
- Reset button and Watch Dog
- USB connectors, Ethernet connector, Serial COM
- 4*5 Keypad
- 5.6" OLED touch-screen
- Embedded technology textbook and operation guidance material provided with the Gemini development kit
| National Software and Integrated Circuit Public Service Platform | Hardware (Kits and Ports) |
|
Meridian CPU
Reduce your product development time, cost, and risk by using the Meridian CPU for your next project. Meridian integrates a Freescale ARM9 processor, memory and power supply components so you don’t have to worry about complex multi-layer board design. It ships with the .NET Micro Framework installed so you can concentrate on writing your application, and not writing low-level C code.
The power CPU and memory combination make it ideal for graphics or networking applications such as home automation, home energy monitoring, hand-held instrumentation, medical devices, in-vehicle displays and many more.
Contact us for more information on volume pricing and licensing options.
| Device Solutions Ltd | Hardware (Kits and Ports) |
|
Meridian/P
Bring your ideas to life fast with the Meridian/P Micro Development Board. Wire up your hardware and start coding in C# using Visual Studio and the .NET Micro Framework.
Shrink your prototype down to the bare essentials with the 2” x 2” (50mm x 50mm) form-factor. The expansion connectors fromTahoe-II are right there in this compact package, along with the LCD signals and a USB port for application download and debug.
Adding extra components is a breeze with SchmartBoards. The Meridian/P works with this incredibly easy-to-use prototyping system. See www.SchmartBoard.com for details.
| Device Solutions Ltd | Hardware (Kits and Ports) |
|
Micro Dev Single Board Computer
Low cost, "Meridian" based Single Board Computer development board.
'Meridian' based with 8Mbytes SDRam and 4 Mbytes of Flash.
The board has 2 serial ports, one selectable to RS232 (DB9 connector) or 3V3 levels. Ethernet on RJ45, SD Card socket, USB device, I2C,SPI,PWM, LCD controller, power from USB or external +5V supply. All 'Meridian' GPIO pins available on 0.1" headers. LCD expansion connector for optional LCD Touch Screen. JTAG connector and free BSP image source code for use with Porting Kit and GCC tools.
Additional expansion boards in development for GPRS/3G, GPS, ZigBee and Low Energy Bluetooth.
100mm x 65mm form factor.
| Sytech Designs Ltd | Hardware (Kits and Ports) |
|